TM 10-3930-641-34-2
TRANSMISSION DISASSEMBLY (CONT)
(Sheet 17 of 20)
LOCATION/ITEM
ACTION
REMARKS
62.
Planet carrier (16) and ring gear (1)
a. Install three 3/8-16NC eyebolts.
b. Attach hoist as shown.
c.
Using two screwdrivers, pry lock ring (11)
away from ring gear (1) until ring gear
drops away from carrier.
63.
Seal rings (15)
Remove from carrier.
64.
Pins (19)
Remove by driving into shafts (17) using a
hammer and punch.
65.
Shafts (17)
Remove. Remove pins (19) from shafts (17).
66.
Planet gears (14) and washers (12)
Remove from carrier (16).
67.
Roller bearings (13)
Remove from gears (14).
68.
Six pins (3)
Remove from plate assembly.
TA099290
Go on to Sheet 18
4-84
