TM 10-3930-641-34-2
TRANSFER GEAR ASSEMBLY (OUTPUT) DISASSEMBLY (CONT)
(Sheet 2 of 8)
LOCATION/ITEM
ACTION
REMARKS
1.
Output transfer gear assembly
Position on wood blocks.
2.
Yoke assembly (17), bearing cage
Remove from bottom of output shaft (68).
(19)
3.
Eleven capscrews (46) (47) and
Remove.
washers (22)
4.
Yoke (50)
a. Attach hoist.
b. Remove yoke with output shaft (68) and
cage (45) attached.
NOTE
Unit weighs 210 lb. (95 Kg).
6.
Capscrew (53) and retainer (52)
Remove from end of shaft (68).
7.
Preformed packing (51)
Remove.
8.
Yoke (50)
Remove.
TA099338
Go on to Sheet 3
4-139
