TM 10-3930-641-34-2
TRANSFER GEAR ASSEMBLY (OUTPUT) DISASSEMBLY (CONT)
(Sheet 5 of 8)
LOCATION/ITEM
ACTION
REMARKS
17.
Capscrews (1) and lock nuts (2)
Remove.
that secure cage (3)
18.
Two of capscrews (11)
Use as forcing screws to loosen cage (3). Install
screws opposite each other in blind holes in
cage (3). (Tighten evenly until cage is loose.)
19.
Cage (3) and shims (4)
Remove from gear case.
20.
Cup (8)
Remove from cage (3) with puller as shown.
21.
Remove.
(16) that secure cage (79)
22.
Two capscrews (1)
Use as forcing screws to loosen cage (79) from
transfer gear case.
23.
Cage (79) and shims (73)
Remove from gear case.
24.
Four hex nuts (75), lockwasher
Remove.
(16) and cover (74)
25.
Preformed packing (76)
Remove from under cover (74) and discard.
26.
Bearing cup (69)
Remove from cage with puller.
TA099341
Go on to Sheet 6
4-142