TM 10-3930-641-34-2
TRANSMISSION CONTROL LOCK REMOVAL (CONT)
(Sheet 2 of 3)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1.
Door assemblies above transmission
Open.
2.
Floor panel at rear of cab
Remove.
3.
Two tube assemblies (1)
Tag and disconnect from transmission control
lock (4). Cap or plug opening.
4.
Two capscrews (2)
Remove.
5.
Transmission control lever
Put in reverse position.
NOTE
Face of bracket must be vertical to slide.
36.
Bracket (3)
Slide off transmission control lock.
NOTE
Make sure bracket is perfectly vertical when
sliding off.
TA099379
Go on to Sheet 3
4-211
