TM 10-3930-641-34-2
REAR DIFFERENTIAL, BEVEL GEAR AND FRONT SUPPORT REMOVAL (CONT)
(Sheet 3 of 4)
LOCATION/ITEM
ACTION
REMARKS
7. Tube assembly (5)
Disconnect from grease fitting on top of
support.
8. Capscrew (3), retainer and yoke
Remove.
assembly (4)
9. Four capscrews (6)
Remove from hydraulic hose junction blocks
on each side of frame. Eight capscrews each.
10. Four capscrews (7) and nuts
Remove.
NOTE
Support assembly weighs 225 lb. (102 Kg).
11. Support assembly (8)
a. Attach floor jack.
b. Remove.
12. Preformed packing
Remove and discard.
13. Bearing
Remove.
TA099408
Go on to Sheet 4
4-265