TM 10-3930-641-34-2
FRONT AND REAR SUPPORT DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 7 of 9)
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY
1.
Preformed packings (1), bearing (9),
Install in front support (10). Put a light coat
and bearing retainer (4)
of grease on packings and bearings.
2.
Front support (10)
a. Attach to floor jack.
b. Place in position on differential as shown.
c.
Install four capscrews (2) and nuts that
secure it.
NOTE
Tighten capscrews to a torque of 750-900 lb.
ft. (1007 to 2118 N-m).
3.
Preformed packing (18)
Install. Grease lightly.
4.
Cover (19)
a. Attach to floor jack.
b. Position against rear axle housing.
c.
Secure with capscrews (20) and washers
(21).
d. Tighten capscrews (20) to a torque of
315-385 lb. ft. (425-525 N-m).
5. Bearing (33)
Replace if damaged. Install in rear support (35).
4-302
