TM 10-3930-641-34-2
FRONT AND REAR SUPPORT DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 8 of 9)
LOCATION/ITEM
ACTION
REMARKS
6.
Preformed packing (1)
Replace.
7.
Rear support (35)
a. Attach to floor jack.
b. Position against cover (19).
c.
Lower vehicle so that pins in rear support
engage holes in vehicle frame.
8.
Capscrews (2), washers (11) and nuts a. Install.
(12) that secure rear support.
b. Tighten capscrews to a torque of 750 lb. ft.
(1007 to 1218 N-m).
9.
Capscrews (2), washers (11) and
a. Install.
nuts (12) that secure front support
b. Tighten nuts to a torque of 750-900 lb. ft.
(1007-1218 N-m).
10.
Tube assembly
Connect to grease fitting.
11.
Bearing (31)
Install.
12.
Plate (30)
Install.
13.
Capscrews (27) and washers (29)
Install.
14.
Bearing (31)
Install.
TA099433
Go on to Sheet 9
4-303
