TM 10-3930-641-34-2
HYDRAULIC PUMP ASSEMBLY/DISASSEMBLY (CONT)
(Sheet 5 of 7)
LOCATION/ITEM
ACTION
REMARKS
2.
Body (14)
Install on cover plate.
NOTE
Make sure you place wide opening over the
inlet port in cover plate.
3.
Isolation plate (6)
Install on inlet side of pump.
4.
Back-up ring (7)
Install.
5.
Packing (9)
Install.
6.
Ring retainer (8)
Install.
7.
Pressure plate (10)
Install.
NOTE
Pressure plate must be installed with the
notch up. Bronze surface must be toward
8.
Drive gear (11)
Install.
9.
Idler gear (12)
Install.
10.
Pressure plate (10)
Install.
NOTE
Pressure plate must be installed with notch
down. Bronze surface must be toward gears.
Go on to Sheet 6
7-17
