TM 10-3930-641-34-2
HYDRAULIC PUMP ASSEMBLY/DISASSEMBLY (CONT)
(Sheet 4 of 7)
LOCATION/ITEM
ACTION
REMARKS
11.
Body (14) and pressure plate
Remove as a unit from cover plate..
12.
Pressure plate (10)
Remove from gear plate.
13.
Drive gear (11)
Remove from cover plate.
14.
Idler Fear (12)
Remove from cover plate.
15.
O-ring seal (5)
Remove from cover plate.
16.
Pressure plate (10)
Remove from cover plate.
17.
Isolation plate (6)
Remove.
18.
Back-up ring (7)
Remove.
19.
O-ring seal (5)
Remove.
20.
Ring retainer (8)
Remove.
ASSEMBLY
NOTE
Clean all parts before assembly.
If grooves (4) in the bore are deeper than .015
in. (0.381 mm), replace body (5), and gears.
1.
O-ring (6)
Install In cover plate.
TA098977
Go on to Sheet 5
7-16