TM 10-3930-641-34-2
MAST REMOVAL/INSTALLATION (CONT)
(Sheet 5 of 5)
LOCATION/ITEM
ACTION
REMARKS
Tighten capscrews to a torque of 1000 130 ft. lbs.
d.
Install two capscrews (6) and retainer plate
(1356 176 Nm).
(5) onto eyes (4) and torque capscrews.
3.
Tilt cylinder (6)
a. Align bearing and install pin.
b.
Do the same for other side.
NOTE
Groove in pin is for retainer plate to fit into.
c.
Install two capscrews and retainer plate.
Do the same for each side.
d.
Remove shipping support (2).
4.
Hose assemblies
Connect.
TA099176
End
7-75