TM 10-3930-641-34-2
MAST DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 5 of 11)
LOCATION/ITEM
ACTION
REMARKS
5.
Upper guide roller assemblies (61)
a. Remove from outer mast.
b.
Remove ring (66).
c.
Remove roller assembly (63) from shaft
(62).
d.
Press bearing (65) from roller (64).
Use 7 in. (17.8 cm) diameter plate.
6.
Wooden blocks
Put in position to support inner mast.
7.
Inner mast
Pull from outer mast.
8.
Rings (45)
Remove.
9.
Lower guide roller assemblies (41)
a. Remove.
b.
Remove ring (44).
c.
Press bearing (43) from roller (42).
10.
Capscrews (46) and washers (47)
Remove.
Go on to Sheet 6
7-80
