TM 10-3930-641-34-2
SIDE TILT CYLINDER REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 3)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1.
Side tilt cylinder (1)
a. Fully retract rod.
b.
Fasten to hoist.
2.
Two hydraulic lines (2)
a. Tag and disconnect.
b.
Cap open ends.
3.
Two capscrews (3) and washers (4)
Remove.
that secure each retainer (5)
WARNING
Use proper tools, never use fingers to push pins
out.
4. Pins (6)
Remove.
TA099191
Go on to Sheet 3
7-102
