TM 10-3930-641-34-2
SIDE TILT CYLINDER REMOVAL/INSTALLATION (CONT)
(Sheet 3 of 3)
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION
NOTE
The rod end of the tilt cylinder attaches to the
carriage bracket assembly. The barrel end
attaches to the carriage tilt assembly.
1.
Side tilt cylinder (1)
a. Fasten to hoist.
b.
Put in position.
2.
Two hydraulic lines (2)
Remove caps and connect.
3.
Pins (6)
Install.
4.
Capscrews (3), washers (4), and
Install.
retainers (5)
End
7-103
