TM 10-3930-641-34-2
SIDE SHIFT/TILT CYLINDERS DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 2 of 4)
LOCATION/ITEM
ACTION
REMARKS
NOTE
DISASSEMBLY
The following is disassembly/assembly of the
side shift cylinder. This procedure is identical
to that for the side tilt cylinder.
1.
Side shift cylinder (7)
a. Put in position on repair stand.
b.
Fully extend rod (13).
2.
Rod (13)
a. Place support under rod.
b.
Secure rod to stand.
3.
Collar (12)
Remove.
4.
Rod (13)
Pull from barrel assembly (8).
5.
Nut (9)
Remove from rod (13) using torque
multiplier.
6.
Piston (10), gland-(11)
Remove from rod (13).
7.
Elbows (5), preformed packings (6)
Remove from barrel assembly (8).
Go on to Sheet 3
7-108