TM 10-3930-641-34-2
ROLL-OVER PROTECTIVE STRUCTURE REMOVAL/INSTALLATION (CONT)
(Sheet 4 of 7)
LOCATION/ITEM
ACTION
REMARKS
NOTE
Make sure cab door is open before ROPS is
removed.
6.
ROPS
a. Lift slowly so ROPS (18) will clear the
plenum chamber (17) and rear platform (16).
b. Pull ROPS (18) back so it will clear cab.
Move ROPS sideways until it may be
lowered to ground.
NOTE
ROPS weighs 2500 lb. (1125 kg).
INSTALLATION
1.
ROPS
a. Install three 5/8-11NC forged eyebolts in
top of ROPS.
b. Attach ratchet assembly to front eyebolt and
a chain to the rear eyebolt.
Go on to Sheet 5
8-14
