TM 10-3930-641-34-2
ROLL-OVER PROTECTIVE STRUCTURE REMOVAL/INSTALLATION (CONT)
(Sheet 5 of 7)
LOCATION/ITEM
ACTION
REMARKS
c.
Fasten ratchet assembly and chain to
a hoist.
NOTE
Make sure cab door is in the open position.
d. Lift ROPS (18) into position. Make sure
that there is enough clearance between
ROPS (18) and the plenum chamber (17).
2.
Capscrews (15)
Install capscrews (15) and spacers (19).
Tighten capscrews and remove ratchet
assembly chain, and hoist.
TA099215
Go on to Sheet 6
8-15
