TM 10-3930-675-10-1
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
INITIAL ADJUSTMENTS, DAILY CHECKS, AND SELF-TEST
0005 00
NOTE
Refer to WP 0004 00 for location and operation of controls.
1.
Place master battery switch in ON position.
MASTER
BATTERY
SWITCH
(SHOWN
IN OFF
POSITION)
Perform Before operation Preventive Maintenance Checks and Services (PMCS) (WP 0012 00 and WP 0013 00).
2.
3.
Occupy and adjust seat.
NOTE
Vehicle should not be operated with cab door open.
4.
Close cab door.
5.
Adjust position of joystick.
6.
Adjust left and right exterior mirrors and interior rearview mirror as required.
7.
Adjust steering wheel and column.
8.
Fasten seat belt.
START ENGINE
0005 00
NOTE
Refer to WP 0004 00 for location and operation of instrument panel indicators and controls.
1.
Ensure parking brake is applied.
2.
Place transmission shift control lever to Neutral (N).
3.
Ensure all accessory switches and controls are in the OFF position.
CAUTION
DO NOT operate the starter motor for more than 30 seconds at a time. After 30 seconds, allow starter
motor to cool for at least two minutes before attempting to start engine again. Excessive heating of
starter motor may result in damage or early starter failure.
4.
Turn ignition switch to ON position. System warning lights will illuminate briefly, then go out.
0005 00-2