TM 10-3930-675-10-1
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0013 00
Table 1. Preventive Maintenance Checks and
Services (PMCS) for RTCH-RT 240 - Continued.
LOCATION
ITEM TO
ITEM
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
SERVICE
PROCEDURE
CAPABLE IF:
4
Before
Cab Exterior
c. Check for damage to the rear of cab, Class III oil leaks are evident.
windshield washer reservoir, horn, air
(Con't)
conditioning system components, and
hydraulic lines and cylinders.
5
Before
Boom Sup-
Ensure both boom support locking pins are Boom support locking pins are
port Locking
present and extension is locked by retain- missing, extension is not locked in
Pin
ing pin in extended position.
extended position or is damaged.
RETAINING
BOOM
PIN
SUPPORT
LOCKING
PIN
BOOM
SUPPORT
LOCKING
PIN EXTENSION
350-087
REAR AND
RIGHT SIDE
6
Before
Overall View
a. Check under RTCH for evidence of fluid Class III oil, coolant, or hydraulic
leakages such as oil, coolant, or hydrau- leaks are found. Any fuel leaks
lic fluid.
are found.
b. Visually check that tread is visible and No tread is visible, there are
for damaged tires. Check for missing or gouges below the tread cavity
signs of loose lug nuts.
surface depth, there are cuts in
sidewall deep enough to expose
the steel cord, or there are missing
lug nuts.
7
Before
Hydraulic
Check hydraulic cylinders, hoses, lines, Class III leaks are evident.
Cylinders
and fittings for damage and leaks.
Ensure boom support locking pin is Boom support locking pin is
8
Before
Boom Sup-
present and extension is locked in missing, extension is not locked
port Locking
in extended position or is dam-
extended position.
Pin
aged.
0013 00-2