TM 10-3930-675-10-1
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0013 00
Table 1. Preventive Maintenance Checks and
Services (PMCS) for RTCH-RT 240 - Continued.
LOCATION
ITEM TO
ITEM
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
SERVICE
PROCEDURE
CAPABLE IF:
34
After
Folding Step
Check for damage or missing parts.
and Ladder
35
After
Hydraulic
a. Check for damage and leaks.
Class III leaks are evident.
Reservoir and
Sight Gage
NOTE
Boom must be fully lowered and retracted and RTCH parked on
level ground before checking hydraulic oil level in reservoir.
Engine should be stopped at least five minutes.
b. Check hydraulic oil in the oil level sight Hydraulic oil level is below sight
gage. If hydraulic oil is visible in sight gage.
gage, level is okay. If level is low, before
adding oil, remove one of the fill plugs
from the oil filter cover plates at the top
of the hydraulic oil tank, and allow the
RTCH to rest another five minutes.
Recheck the oil level. If level is still low,
add oil only through one of these fill
points. Refer to add oil IAW instructions
DO NOT FILL THROUGH
THIS PORT
HYDRAULIC RESERVOIR
FILL
SIGHT
POINTS
GAGE
DO NOT FILL THROUGH
THIS PORT
0013 00-9