TM 10-3930-675-10-1
ERROR CODES - CONTINUED
0020 00
Table 4. Error Codes - Continued.
ERROR
DISPLAY
ERROR CODE CATEGORY/
CODE
LAYOUT
DRIVER ACTION
EXPLANATION
VEHICLE LIMITATIONS
Stop Vehicle
Stop Vehicle Immediately
Slewing does not function
128
Put load down safely.
properly (hydraulic stops).
Signal for slewing - out of range.
Abort mission.
Cable defective.
Notify maintenance.
Short circuit.
Potentiometer in joystick not
functioning.
Stop Vehicle
Stop Vehicle Immediately
Tilt does not function properly
(hydraulic stops).
129
Put load down safely.
Signal for tilt in/out - out of range.
Abort mission.
Cable defective.
Notify maintenance.
Short circuit.
Potentiometer in joystick not
functioning.
Stop Vehicle
Stop Vehicle Immediately
No overload protection
system.
130
Put load down safely.
Overload protection error.
Reduced hydraulic speed.
Abort mission.
Error codes 131 to 136 or 210 have
Notify maintenance.
been active.
Stop Vehicle
Stop Vehicle Immediately
No overload protection
131
Press RESET.
system.
Boom sensor - boom length out of
Put load down safely.
Reduced hydraulic speed.
range or no signal change when
Abort mission.
boom is moving.
Notify maintenance.
Cable defective.
Short circuit.
Potentiometer damaged.
Hydraulic failure.
Stop Vehicle
Stop Vehicle Immediately
No overload protection
132
Press RESET.
system.
Boom sensor - boom angle out of
Put load down safely.
Reduced hydraulic speed.
range or no signal change when
Abort mission.
lowering/lifting boom.
Notify maintenance.
Sensor bracket or lever damaged.
Cable defective.
Short circuit.
Potentiometer damaged.
Hydraulic failure.
0020 00-7
