TM 10-3930-675-10-1
ERROR CODES - CONTINUED
0020 00
Table 4. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Stop Vehicle
Stop Vehicle Immediately
Operating system and
202
Put load down safely.
tophandler not working.
Supply voltage - CAN 791.
Abort mission.
Circuit breaker tripped.
Notify maintenance.
Cable defective.
Stop Vehicle
Stop Vehicle Immediately
Operating system not
working.
203
Put load down safely.
Ref. voltages 10V - 791.
Abort mission.
Circuit breaker tripped.
Notify maintenance.
Cable defective.
Stop Vehicle
Stop Vehicle Immediately
None if code clears.
Operating system and
205
Shut engine OFF/ON.
Memory fault - check ECU 791.
tophandler not working.
If code clears, resume
Circuit breaker tripped.
mission.
Cable defective.
If code remains,
notify maintenance.
Stop Vehicle
Stop Vehicle Immediately
Generate error code 130.
210
Press RESET.
Tilt angle sensor - signal out of
Put load down safely.
range.
Abort mission.
Potentiometer damaged.
Notify maintenance.
Cable defective.
Short circuit.
Stop Vehicle
Stop Vehicle Immediately
Both locked and unlocked
twistlock at the same time.
212
Abort mission.
Logical error - left twistlock.
Safe operation is not possible.
Notify maintenance.
Short circuit.
Signal from both 7204L and 7205L.
Stop Vehicle
Stop Vehicle Immediately
Both locked and unlocked
twistlock at the same time.
213
Abort mission.
Logical error - right twistlock.
Safe operation is not possible.
Notify maintenance.
Short circuit.
Signal from both 7204R and 7205R.
Stop Vehicle
Stop Vehicle Immediately
Forklift operation is not
possible.
214
Press RESET.
Logical error - forklift sensors.
Abort mission.
Cable defective.
Notify maintenance.
Signal from 7206-1 or 7206-2.
0020 00-11
