TM 10-3930-675-10-2
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
OPERATE LIFTING BOOM AND TOPHANDLER - CONTINUED
2.
RTCH Operating Characteristics and Information.
a. The transmission will shift to neutral automatically if the container is not lifted off the ground before trying to drive.
The following pop-up icon will display during this condition. Pressing "R" (Reset) will delete the icon from the dis-
play. The container must be lifted off the ground before the transmission will re-engage.
b. If the tophandler is not in the proper carry position (with or without a container), the maximum forward travelling
speed will be reduced to 7 mph (11 kph). The proper carry position without a container is the tophandler positioned
just above your field of view. With a container, the proper carry position is with the bottom of the container posi-
tioned just above your field of view. The maximum travel speed in reverse for any boom position is limited to 7 mph
(11 kph).
c. To minimize damage from boom, tophandler, and container contact, the tophandler rotation is limited to 40 degrees
clockwise or counterclockwise from the operational position if the boom angle is above 15 degrees. The full rotation
of 105 degrees clockwise or 40 degrees counterclockwise can be obtained if the boom angle is under 15 degrees. The
lift function will be stopped at 15 degree boom angle if lifting a tophandler that is rotated more than 40 degrees clock-
wise. The following pop-up icon will display during this condition. Pressing "R" (Reset) will delete the icon from the
display.
d. When the tophandler is rotated more than 40 degrees clockwise, the tilt "bottom in" function is limited. The tilt func-
tion is controlled in order to reduce the possibility of boom and tophandler contact. The following pop-up icon will
display during this condition. Pressing "R" (Reset) will delete the icon from the display.
e. To aid in the engagement of the tophandler into a container, the following pop-up icon will display. This icon indi-
cates when each corner of the tophandler has seated in the container. When all four corners have seated, the icon dis-
appears from the display. Pressing "R" (Reset) will delete the icon from display.
0005 00-10