TM 10-3930-675-10-2
PREPARATION FOR TRANSPORT - CONTINUED
0007 00
PLACING CAB IN TRANSPORT POSITION - CONTINUED
NOTE
Skip step b if RTCH cab is being moved to transport position in order to perform maintenance or if
boom support is NOT going to be lowered.
b. If boom support is to be lowered, remove retaining pin from boom support locking pin extension on each side of
boom support.
BOOM SUPPORT RETAINING BOOM SUPPORT BOOM
BOOM SUPPORT
RETAINING
SUPPORT
PIN
LOCKING PIN
PIN
LOCKING PIN
374M-0014
BOOM SUPPORT
BOOM SUPPORT
LOCKING PIN EXTENSION
LOCKING PIN EXTENSION (RETRACTED)
NOTE
It may be necessary to turn on the auxiliary pump and slowly move the cab to aid in releasing the cab
pins.
c. Release cab by removing two retaining pins and pins from cab subframe.
RETAINING PIN
PIN
CAB
SUBFRAME
350-089
CAB IN OPERATIONAL POSITION
0007 00-3