TM 10-3930-675-10-2
PREPARATION FOR TRANSPORT - CONTINUED
0007 00
AIR TRANSPORT - CONTINUED
WARNING
Ensure tabs on ramp are engaged into ramp seat holes in dolly wheel storage compartment. Failure to
secure ramp properly may cause ramp to fall under weight of dolly wheel, causing injury to person-
nel.
h. Open dolly wheel storage compartment. Unfasten straps and remove ramp from stowage. Position ramp against stor-
age compartment.
i. Remove dolly wheels from storage compartment. Check tire pressure to ensure all are at 85 psi (586 kPa).
RAMP
DOLLY WHEELS
STORAGE COMPARTMENT (STOWED)
RAMP
DOLLY WHEELS
NOTE
When installed, front and rear dolly wheels are turned toward each other.
j. Install each dolly wheel on tophandler:
(1)
Place dolly wheel so that tire will be under the twistlock when wheel is lifted by tophandler.
(2)
Install upper pin from outside of tophandler. Lock pin in position with retaining pin.
(3)
Remove lower pin from dolly wheel and set aside.
UPPER
PIN
DOLLY
WHEEL
TWISTLOCK
0007 00-18
