TM 10-3930-675-10-2
ERROR CODES - CONTINUED
0020 00
Table 4. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Finish Mission
Information/Maintenance
Boom folding is not possible.
422
Notify maintenance.
Digital input not read correctly -
"Sensor, cab in transport position."
Cables defective.
Steering computer damaged.
Finish Mission
Information/Maintenance
Ether injection is not possible.
423
Notify maintenance.
Digital input not read correctly -
"Ether start switch."
Cables defective.
Steering computer damaged.
Stop Vehicle
Warning - Degraded
Fording operations are not
Operation
possible.
426
Press RESET.
Finish mission.
Digital input not read correctly -
Notify maintenance.
"Fording level switch."
Cables defective.
Steering computer damaged.
Finish Mission
Information/Maintenance
Work lights on tophandler do
427
Notify maintenance.
not function.
Digital input not read correctly -
"Tophandler work light switch."
Cables defective.
Steering computer damaged.
Stop Vehicle
Error on Power Supply for
440
Steering wheel has no end
Steering Wheel Sensor
Abort mission.
positions or steering
Notify maintenance.
Error code can be caused by:
Short circuit of analog output
terminal 38 to +24V.
Short circuit of analog output
terminal 38 to ground.
Fault in steering computer output.
Stop Vehicle
Warning - Degraded
None.
Operation
450
Press RESET.
Finish mission.
Ambient temperature too high.
Notify maintenance.
Temperature sensor defective.
ECU 792 defective.
0020 00-21
