TM 10-3930-675-10 0013 00-5 Table 1.  Preventive Maintenance Checks and Services (PMCS) for RTCH-RT 240 - Continued. ITEM NO. INTERVAL LOCATION PROCEDURE NOT FULLY MISSION CAPABLE IF: ITEM TO CHECK/ SERVICE NOTE Perform the following checks if forklift kit is to be used. 14 Before Forklift Kit a. Ensure   all   retaining   and   locking pins    are    present    and    properly secured. a. Retaining or locking pins are missing. b. Inspect  hydraulic  hoses  and  quick disconnects  for  dirt,  damage,  and proper operation. b.  Hydraulic   hoses   or   quick disconnects are damaged. CAB INTERIOR NOTE Refer to WP 0004 00 for the location of all gages, switches, and indicator lights. 15 Before Instrument Panel Check  for  damaged  gages,  switches, indicator, and warning lights. Any  warning  indicator  is  bro- ken or unreadable. 16 Before Fire Extin- guisher a. Check for missing or damaged fire extinguisher. a. Fire  extinguisher  is  missing or damaged. b. Check   gage   for   proper   pressure reading. b.  Pressure  gage  needle  is  in recharge area. c. Check for damaged or missing seal. c.  Seal is broken or missing. 17 Before Seat and Seat Belt Check  seat  and  seat  belt  for  damage and proper operation. Seat belt is damaged. 18 Before Steering Wheel and Column Check steering wheel and column for damage and proper operation (tilt and height adjustments). 19 During Engine Startup a. Start  engine.  Verify  that  all  indica- tor and warning lights operate prop- erly on ECS display screen. a. Engine will not start. Warn- ing lights remain ON. b. Check air cleaner restriction indica- tor. If red band is showing, service air cleaner as soon as possible (WP 0014 00). b.  Red band is showing. c. Check operating lights (brake lights, turn signals, etc.). c.  Brake lights and turn signals do not operate. 20 During Hydraulic Controls a. Perform  a  functional  check  of  all lifting boom and tophandler  opera- tions. a. Any  system  or  function  is not operating properly.