Error Code 1141 - Oil Pressure Sensor Circuit Failure - Continued

Error Code 1141 - Oil Pressure Sensor Circuit Failure - Continued - TM-10-3930-675-20-1_339

Error Code 1141 - Oil Pressure Sensor Circuit Failure - Continued - TM-10-3930-675-20-1_341

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
307

TM 10-3930-675-20-1 0019 00-12 ENGINE OIL PRESSURE SENSOR TROUBLESHOOTING - CONTINUED 0019 00 Table 2. Error Code 1141 - Oil Pressure Sensor Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1141 - Oil Pressure Sensor Circuit Failure - Continued 13.Place ignition switch in OFF position. Disconnect engine harness from oil pressure/ temperature sensor and disconnect sensor harness from engine ECU. 14.Measure resistance from pin 44 (or pressure signal) of sensor harness connector to pin C (or 3) of oil pressure/ temperature sensor connector on harness side. Resistance should be less than 10 ohms. a. If resistance is not as specified, repair or replace connectors (WP 0111 00). b. If engine harness requires replacement, notify SRA. 15.Disconnect sensor harness connector from engine ECU. Place ignition switch in ON position. <10 OHMS

Privacy Statement
Press Release
Contact