Table 4. Error Code 1433 - Intake Manifold Pressure Sensor Circuit Failure Troubleshooting Procedures

Table 3. Error Code 1419 - Intake Manifold Pressure Sensor Circuit Failure Troubleshooting Procedures. - TM-10-3930-675-20-1_399

Error Code 1433 - Intake Manifold Pressure Sensor Circuit Failure - Cont

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
364

TM 10-3930-675-20-1 0022 00-14 ENGINE PRESSURE SENSOR TROUBLESHOOTING - CONTINUED 0022 00 Table 4. Error Code 1433 - Intake Manifold Pressure Sensor Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1433 - Intake Manifold Pressure Sensor Circuit Failure - Continued 7. Place ignition switch to OFF position. Disconnect sensor harness from intake manifold pressure sensor, and disconnect sensor harness from engine ECU. 8. Measure resistance from sensor harness connector pin 40 to intake manifold pressure sensor connector pin 2. Resistance should be less than 10 ohms. If engine harness requires replacement, notify SRA. 9. Place ignition switch to OFF position. Disconnect sensor harness from intake manifold pressure sensor and from engine ECU. Measure resistance from sensor harness connector pin 39 to all other pins in connector. Resistance should be more than 100k ohms. a. If resistance is as specified, replace intake manifold pressure sensor (WP 0093 00). b. If resistance is not as specified, notify SRA. B 40 <10 OHMS USE TEST LEAD KIT P/N 3822758

Privacy Statement
Press Release
Contact