Error Code 1123 - Intake Manifold Pressure Sensor Circuit Failure - Cont

Error Code 1123 - Intake Manifold Pressure Sensor Circuit Failure - Cont - TM-10-3930-675-20-1_396

Error Code 1123 - Intake Manifold Pressure Sensor Circuit Failure - Cont - TM-10-3930-675-20-1_398

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
361

TM 10-3930-675-20-1 0022 00-11 ENGINE PRESSURE SENSOR TROUBLESHOOTING - CONTINUED 0022 00 Table 2. Error Code 1123 - Intake Manifold Pressure Sensor Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1123 - Intake Manifold Pressure Sensor Circuit Failure - Continued b. Measure resistance from sensor harness connector pin 39 to all other pins in connector. Resistance should be more than 100k ohms. a. If resistance is as specified, replace intake manifold pressure sensor (WP 0093 00). b. If resistance is not as specified, notify SRA. 9. Turn ignition switch to OFF position, disconnect intake manifold pressure sensor from engine harness, and disconnect sensor harness from engine ECU. 10.Measure resistance from sensor harness connector pin 39 to intake manifold pressure sensor connector pin C. Resistance should be less than 10 ohms. If engine harness requires replacement, notify SRA. 39 TEST ALL PINS

Privacy Statement
Press Release
Contact