Home
Download PDF
Order CD-ROM
Order in Print
Table 2. Error Code 714 - Clutch K1 Short Circuit to Chassis Failure Troubleshooting Procedures
Error Code 715 - Clutch K1 Open Circuit Failure - Cont
TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
430
431
432
433
434
435
436
437
438
439
440
TM 10-3930-675-20-1
0028 00-4
TRANSMISSION CLUTCH CIRCUIT TROUBLESHOOTING - CONTINUED
0028 00
Table 2. Error Code 714 - Clutch K1 Short Circuit to Chassis Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 714 - Clutch K1 Short Circuit to
Chassis Failure - Continued
5. Disconnect connector 827,
connector X172, and trans-
mission ECU (793) connector
and check for continuity to
chassis at all pins from
connector 827 pin 1 thru pin 4
and at all pins from connector
X172 pin 1 thru pin 7.
a. If continuity is present, repair
or replace connectors (WP
0111 00).
b. If wiring harness must be
replaced, notify SRA.
c. If continuity is not present,
notify SRA.
Table 3. Error Code 715 - Clutch K1
Open Circuit
Failure Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 715 - Clutch K1
Open Circuit
Failure
1. Remove cab transmission and
steering ECU panel cover and
check
transmission
ECU
connector
for
proper
connection (WP 0079 00).
Connect loose or disconnected
connector.
2. Remove cab rear wall center
panel
cover
and
check
connector X172 for proper
connections.
Connect loose or disconnected
connectors.
3. Move
cab
to
transport
position
and
remove
transmission access covers
(WP 0135 00).
4. Check transmission electrical
harness
connector
827,
located
on
top
of
transmission,
for
proper
connection.
Connect loose or disconnected
connectors.
5. Perform
continuity
checks
between
the
following
connectors and pins:
a. If
continuity
is not present,
repair or replace connectors
(WP 0111 00).
b. If wiring harness must be
replaced, notify SRA.
a. connector 827 pin 1 and
connector X172 pin 1.
b. connector 827 pin 2 and
connector X172 pin 2.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business