TM 10-3930-675-20-1
0027 00-11
TRANSMISSION SPEED SENSORS TROUBLESHOOTING - CONTINUED
0027 00
Table 11. Error Code 659 - Output Speed Sensor Failure, Short Circuit to Chassis
Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 659 - Output Speed Sensor Failure,
Short Circuit to Chassis - Continued
5. Disconnect connector 760,
connector
X173,
and
connector on transmission
ECU.
6. Check for continuity to
chassis at connector 760 pin
1, connector X173 pin 1,
connector 760 pin 2, and
connector X173 pin 2.
a. If continuity is present, repair
or replace connectors (WP
0111 00).
b. If wiring harness must be
replaced, notify SRA.
c. If continuity is not present,
replace output speed sensor
(WP 0095 00).
Table 12. Error Code 660 - Output Speed Sensor Failure, Logical Error Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 660 - Output Speed Sensor Failure,
Logical Error
Place ignition switch in OFF
position for 30 seconds and then
back in ON position.
If error code is still present,
perform troubleshooting pro-
cedures for error code 658.
Table 13. Error Code 662 - Output Speed Sensor Failure, Logical Speed Error Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 662 - Output Speed Sensor Failure,
Logical Speed Error
Place ignition switch in OFF
position for 30 seconds and then
back in ON position.
If error code is still present,
perform troubleshooting pro-
cedures for error code 652, error
code 655, and/or error code 658.
