TM 10-3930-675-20-2
0073 00-9
CIRCUIT BREAKERS AND RELAYS REPLACEMENT - CONTINUED
0073 00
50A CIRCUIT BREAKERS REMOVAL
1.
Remove engine cover (WP 0143 00).
2.
Disconnect battery cables (WP 0108 00).
NOTE
Tag wires for installation.
3.
Remove protective covers (18) from 50A circuit breaker terminals.
4.
Remove nuts (19), washers (20), and terminal leads (21) from circuit breakers (22).
5.
Remove screws (23), nuts (24), washers (25), and circuit breakers (22) from mounting plate (17).
50A CIRCUIT BREAKERS INSTALLATION
1.
Position 50A circuit breakers (22) on mounting plate (17) and secure with screws (23), nuts (24), and washers (25).
2.
Connect terminal leads (21) to circuit breakers (22) and secure with nuts (19) and washers (20).
3.
Place protective covers (18) over circuit breaker terminals.
4.
Reconnect battery cables (WP 0108 00).
5.
Install engine cover (WP 0143 00).
17
18
19,20,2122,23,24,25