TM 10-3930-675-20-2
0074 00-2
TOPHANDLER PROXIMITY SWITCHES REPLACEMENT - CONTINUED
0074 00
TWISTLOCK PROXIMITY SWITCH REMOVAL - CONTINUED
2.
Loosen four screws (6) and remove cover (4) from junction box (5). Inspect rubber seal in groove of cover. Replace only
if damaged.
3.
Loosen cable nut (10) and slide cable nut and grommet (9) back on proximity switch (1) cable.
CAUTION
To avoid damage to junction box, a fine-tipped jeweler’s screwdriver should be used when disconnecting
proximity switch wires. DO NOT use a punch.
NOTE
Tag wires for installation.
4.
Using a jeweler’s screwdriver, disconnect proximity switch wires (8) from terminal blocks (7).
NOTE
Remove cable clamps and tiedown straps as needed. Discard tiedown straps.
5.
Remove proximity switch (1) with cable from tophandler.
4
5
6
5
7
8
1
9
10
