TM 10-3930-675-20-2
0085 00-3
DIRECTIONAL AND SIDE MARKER LIGHT MAINTENANCE - CONTINUED
0085 00
DIRECTIONAL LIGHT REMOVAL
NOTE
•
Front and rear directional lights are removed the same way.
•
Use marker tags to ensure proper connection of connectors.
•
Electrical connectors of light may be repaired in accordance with WP 0111 00.
1.
Remove directional light bulbs and LED(s) (refer to Directional Light Bulb and LED Replacement).
2.
Disconnect two connectors (13) of directional light (8) from connectors of wiring harness (12).
3.
Remove two screws (14), ground terminals (9) of wiring harness (12), washers (10), and directional light (8) from
bracket (11).
DIRECTIONAL LIGHT INSTALLATION
NOTE
Front and rear directional lights are installed the same way.
1.
Install directional light (8) and ground terminals (9) of wiring harness (12) to bracket (11) with two washers (10) and
screws (14).
2.
Connect two connectors (13) of directional light (8) to connectors of wiring harness (12).
3.
Install bulbs and LED(s) (refer to Directional Light Bulb and LED Replacement).
11
9, 10
8
13
14
12
