TM 10-3930-675-20-20108 00-4BATTERY CABLES REPLACEMENT - CONTINUED0108 00CLEANING AND INSPECTION1.Clean batteries and battery posts with a wire brush. Wipe clean with rags.2.Inspect for corrosion or other damage.3.Apply a protective coating of grease to battery posts.INSTALLATION1.Connect two POSITIVE battery cables (11) to master battery switch (WP 0109 00).2.Connect POSITIVE battery cables (11) to two of four batteries (15).3.At end of two POSITIVE battery cables (11), raise plastic cap (12) and tighten screw (14) and nut (13) of battery cableclamp.4.Install two battery cables (10) to four batteries (15).5.At ends of two battery cables (10), raise plastic cap (7) and tighten screw (9) and nut (8) of battery cable clamp.6.Connect four NEGATIVE cables (4) to side of battery compartment (1) with washer (6) and locknut (5).7.Connect NEGATIVE battery cables (19) to two of four batteries (15).8.At end of two NEGATIVE battery cables (19), raise plastic cap (18) and tighten screw (17) and nut (16) of battery cableclamp.1978,910111213,14151016,1718
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
