TM 10-3930-675-20-2
0125 00-3
SERVICE BRAKE SYSTEM HYDRAULIC HOSES AND FITTINGS REPLACEMENT - CONTINUED
0125 00
INSTALLATION
NOTE
Refer to General Maintenance Instructions (WP 0194 00) for complete instructions on connecting hydraulic
hoses and applying proper torque.
1.
Lubricate and install new o-ring(s).
2.
Remove caps/plugs and install and tighten hose(s) or fitting(s).
3.
Install clamp(s) and new tiedown strap(s) (if applicable) in same position as noted during removal.
4.
Check oil level in hydraulic reservoir (LO 10-3930-675-12).
5.
Start engine (TM 10-3930-675-10) and check for leaks.
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0183 00).
END OF WORK PACKAGE
