TM 10-3930-675-20-2
0126 00-4
BRAKE COOLING FILTER AND FILTER HEAD REPLACEMENT - CONTINUED
0126 00
BRAKE COOLING FILTER HEAD INSTALLATION
NOTE
Refer to General Maintenance Instructions (WP 0194 00) for complete instructions on connecting hydraulic
hoses and applying proper torque.
1.
If mounting bracket (10) was removed, install bracket to vehicle with two washers (9) and screws (8).
2.
Position filter head (3) on mounting bracket (10) and secure with two washers (7) and screws (6).
3.
Apply pipe sealant to threads of two adapter fittings (5) and install in filter head (3).
4.
Connect two hydraulic hoses (4) to filter head (3).
5.
Install new brake cooling filter (refer to Brake Cooling Filter Installation).
6.
Check oil level in hydraulic reservoir (LO 10-3930-675-12).
7.
Start engine (TM 10-3930-675-10) and check for hydraulic oil leaks.
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0183 00).
END OF WORK PACKAGE
4
5
10
8,9
6,7
5
4
3