TM 10-3930-675-20-2
0128 00-2
DOLLY WHEEL MAINTENANCE - CONTINUED
0128 00
CLEANING AND INSPECTION - CONTINUED
3.
For tire maintenance, refer to TM 9-2610-200-14.
ASSEMBLY
1.
Install grease fitting (3) to hub of wheel (10).
2.
Apply a thin coat of grease to two new o-rings (4) and position one o-ring on each side of hub of wheel (10).
3.
Apply a thin coat of grease to bearing surface of axle shaft (8) and install axle shaft thru bracket (2) and wheel (10).
Rotate axle shaft, as necessary, until fully seated.
4.
Install retainer (9) to each end of axle shaft (8) with two screws (5), washers (6), and nuts (7).
5.
Position each of two o-rings (4) against surface of bracket (2).
6.
Lubricate dolly wheel (LO 10-3930-675-12).
7.
Return dolly wheel to battery and dolly wheels storage compartment (TM 10-3930-675-10).
END OF WORK PACKAGE
1
10
9
8
5,6,7
4
3
2