TM 10-3930-675-20-2
0146 00-2
FENDER ASSEMBLY REPLACEMENT - CONTINUED
0146 00
REMOVAL - CONTINUED
1.
At front and rear of fender (10), remove six locknuts (11), screws (12), and 12 washers (13). Discard locknuts.
2.
Remove fender (10) from fender support bracket (1).
NOTE
Perform steps 3 thru 5 to remove fender support bracket from vehicle.
3.
Remove nine screws (2), washers (3), and clamps (4) to release wiring harness (5) from fender support bracket (1).
4.
Remove four locknuts (6), screws (7), eight washers (8), and light bracket (9) from fender support bracket (1). Set light
bracket and wiring harness (5) aside. Discard locknuts.
5.
Remove eight screws (14), lockwashers (15), and fender support bracket (1) from vehicle. Discard lockwashers.
1
2,3,4
5
6,7,8
9
10
11,12,13
1
14,15
