TM 10-3930-675-20-2
0153 00-2
BATTERY AND DOLLY WHEELS STORAGE COMPARTMENT REPLACEMENT - CONTINUED
0153 00
REMOVAL
1.
Remove six locknuts (1), screws (2), 12 washers (3), and footstep (4) from top of storage compartment (5). Discard
locknuts.
2.
Disconnect cables from NATO slave receptacle and master battery switch (WP 0109 00 and WP 0110 00).
3.
Remove cables from storage compartment (5) by pulling them out into engine compartment.
4.
Position forklift truck against side of vehicle with forklift tines supporting weight of storage compartment (5).
5.
Remove five locknuts, ten washers, and five bolts securing storage compartment (5) to side of frame (6). Discard lock-
nuts.
6.
Remove six locknuts (7), 12 washers (8), and six bolts (9) securing top of storage compartment (5) to top of frame (6).
Discard locknuts.
7.
Remove storage compartment (5) from vehicle frame (6).
INSTALLATION
1.
Use forklift truck to position storage compartment (5) against vehicle frame (6).
2.
Install five bolts, ten washers, and five new locknuts securing storage compartment (5) to side of frame (6).
3.
Install six bolts (9), 12 washers (8), and six new locknuts (7) securing top of storage compartment (5) to top of frame
(6). Remove forklift truck.
4.
Feed cables for NATO slave receptacle and master battery switch into storage compartment thru opening in back of
compartment.
5.
Connect cables to NATO slave receptacle and to master battery switch (WP 0109 00 and WP 0110 00).
6.
Install footstep (4) to top of storage compartment (5) with 12 washers (3), six screws (2), and new locknuts (1).
1,2,3
4
5
6
7,8,9
5
