TM 10-3930-675-20-2
0154 00-2
REMOTE HYDRAULIC CONTROL COMPARTMENT REPLACEMENT - CONTINUED
0154 00
REMOVAL
1.
Ensure all hydraulic hoses are removed from compartment (2).
2.
Position forklift truck against side of vehicle with forklift tines supporting weight of compartment (2).
3.
Remove four locknuts, eight washers, and four screws securing compartment (2) to side of frame (1). Discard locknuts.
4.
Remove six locknuts (3), 12 washers (4), and six screws (5) securing top of compartment (2) to top of frame (1). Discard
locknuts.
5.
Remove compartment (2) from vehicle.
INSTALLATION
1.
Use forklift truck to position compartment (2) against vehicle frame (1).
2.
Install four screws, eight washers, and four new locknuts securing compartment (2) to side of frame (1).
3.
Install six screws (5), 12 washers (4), and six new locknuts (3) securing top of compartment (2) to top of frame (1).
Remove forklift truck.
4.
Install mudguard (WP 0147 00).
5.
Install left-side stair assembly (WP 0145 00).
6.
Install boom lowering solenoid valve (WP 0169 00).
7.
Install ball valve (shutoff valve #5) (WP 0180 00).
8.
Install boom folding control valve (WP 0170 00).
9.
Install cab transport control valve (WP 0168 00).
10.
Install hydraulic system test point fittings (WP 0178 00).
11.
Install oil sampling valves (WP 0054 00).
12.
Operate cab lift/lower lever in remote hydraulic control compartment to lower cab transport lift (TM 10-3930-675-10).
END OF WORK PACKAGE
1
2
3,4,5
