TM 10-3930-675-20-2
0156 00-2
WINDSHIELD WIPER MAINTENANCE - CONTINUED
0156 00
FRONT WINDSHIELD WIPER AND MOTOR REMOVAL
NOTE
To remove wiper blade only, perform step 1.
1.
Remove screw (5) and wiper blade (4) from yoke (9).
2.
Release jet and hose (8) from steering arm (7).
3.
As required, remove two caps (1), c-clips (2), and washers (3) to separate steering arm (7) and wiper arm (6) from yoke
(9).
NOTE
Perform step 4 to remove steering arm and wiper arm.
Note position of steering arm and wiper arm prior to removal to ensure correct installation.
4.
Lift cover and remove nut (19), lockwasher (20), steering arm (7), and wiper arm (6) from windshield wiper motor
shafts (14). Discard lockwasher.
5.
Disconnect hose (8) from nipple (11).
6.
Remove four capnuts (12), washers, and cover (13) with windshield wiper motor from panel (18).
1,2,3
4
5
6
7
8
9