TM 10-3930-675-20-20165 00-2AUXILIARY HYDRAULIC PUMP REPLACEMENT - CONTINUED0165 00REMOVAL1.Remove three locknuts (1), bolts (2), washers (3), spacers (4), and cover (5). Discard locknuts.2.Trace supply hose (9) back to hydraulic reservoir. Close ball valve in supply hose at reservoir.3.Disconnect supply hose (9) from straight connector (10) of pump (8).4.Disconnect pressure hose (12) from elbow (11).5.Peel back rubber boot from terminal post (6). Remove nut (7) and disconnect two black wires (13) and gray wire (14)from terminal post.1,2,3,4513146,789101112
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
