TM 10-3930-675-20-2
0166 00-4
TOPHANDLER HYDRAULIC SLEWING MOTORS REPLACEMENT - CONTINUED
0166 00
REMOVAL - CONTINUED
NOTE
Note orientation of slewing motor for positioning hydraulic connections on installation.
5.
Remove ten bolts (11) and washers (12) securing slewing motor (6).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in death
or injury to personnel.
Slewing motor weighs approximately 150 lb (68 kg). Lifting device must have sufficient capacity to lift
motor. Failure to follow this warning may result in injury to personnel.
6.
With assistance, and using nylon sling and suitable lifting device, remove slewing motor (6) with pinion gear (13) from
turning plate (1).
1
11,12
6
13
11,12
14