TM 10-3930-675-24-1
ERROR CODES - CONTINUED
0005 00
Table 1. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Finish Mission
Information/Maintenance
Gearshift quality is reduced
656
Notify maintenance.
due to another control mode.
Short circuit to ground at internal
(Operating mode: substitute
speed input, transmission ECU
clutch control).
measures a voltage less than
0.45V at speed input pin
Cables defective.
Sensor defective.
Press RESET
Information/Maintenance
Gearshift quality is reduced
due to another control mode.
657
Finish mission.
Logical error at internal speed
(Operating mode: substitute
Notify maintenance.
input, transmission ECU mea-
clutch control).
sures internal speed over a thresh-
old and at the next moment the
If there is also a failure at
measured speed is zero
output speed, transmission
Cables defective.
ECU shifts to neutral.
Sensor defective.
Incorrect sensor gap size.
Limp home.
Stop Vehicle
Warning - Degraded
Gearshift quality is reduced
Operation
due to another control mode.
658
Press RESET.
(Operating mode: substitute
Finish mission.
Short circuit to battery voltage or
clutch control).
Notify maintenance.
open circuit at output speed input,
transmission ECU measures a
If there is also a failure at
voltage higher than 12.5V at
turbine speed, transmission
speed input pin
ECU shifts to neutral.
Cables defective.
Sensor defective.
Limp home.
Stop Vehicle
Warning - Degraded
Gearshift quality is reduced
Operation
due to another control mode.
659
Press RESET.
(Operating mode: substitute
Finish mission.
Short circuit to battery voltage at
clutch control).
Notify maintenance.
output speed input, transmission
ECU measures a voltage less than
If there is also a failure at
1.0V at speed input pin
turbine speed, transmission
Cables defective.
ECU shifts to neutral.
Sensor defective.
Limp home.
0005 00-25
