TM 10-3930-675-24-1
ERROR CODES - CONTINUED
0005 00
Table 1. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Stop Vehicle
Warning - Degraded
Gearshift quality is reduced
Operation
660
Press RESET.
due to another control mode.
Finish mission.
(Operating mode: substitute
Logical error at output speed
Notify maintenance.
clutch control).
input, transmission ECU mea-
sures internal speed over a thresh-
If there is also a failure at
old and at the next moment the
turbine speed, transmission
measured speed is zero
ECU shifts to neutral.
Cables defective.
Sensor defective.
Limp home.
Stop Vehicle
Warning - Degraded
Gearshift quality is reduced
Operation
due to another control mode.
662
Press RESET.
(Operating mode: substitute
Finish mission.
Output speed does not fit other
clutch control).
Notify maintenance.
speed signals. If transmission is
not in neutral and shifting has fin-
If there is also a failure at
ished, transmission ECU mea-
turbine speed, transmission
sures output speed as zero and
ECU shifts to neutral.
turbine or internal speed as not
equal to zero
Limp home.
Cables defective.
Sensor defective.
Incorrect sensor gap size.
Finish Mission
Warning - Degraded
Error codes from transmission
Operation
ECU will not show.
684
Shut engine OFF/ON.
If code clears, resume
Time-out of CAN message from
mission.
display computer
If code remains,
Cable defective.
notify maintenance.
Defective display computer.
Finish Mission
Warning - Degraded
Error codes from transmission
Operation
685
Shut engine OFF/ON.
ECU will not show.
If code clears, resume
Time-out of CAN message from
mission.
display computer
If code remains,
Cable defective.
notify maintenance.
Defective steering computer.
0005 00-26
