TM 10-3930-675-24-1
ERROR CODES - CONTINUED
0005 00
Table 1. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Stop Vehicle
Stop Vehicle Immediately
Reduced power and speed.
1214
Check oil level.
Oil pressure signal indicates tem-
Press RESET.
perature above critical threshold
If error remains,
notify maintenance.
Finish mission.
Finish Mission
Information/Maintenance
Reduced power and speed.
1221
Notify maintenance.
High voltage detected at ambient
air pressure sensor circuit
Finish Mission
Information/Maintenance
Reduced power and speed.
1222
Notify maintenance.
Low voltage detected at ambient
air pressure sensor circuit
Stop Vehicle
Warning - Degraded
Engine will run degraded.
Operation
1227
Press RESET.
No protection for oil pressure.
Finish mission.
High voltage detected on ECM
Notify maintenance.
voltage supply line to some sen-
sors
Stop Vehicle
Stop Vehicle Immediately
Fuel shutoff valve is closed
until engine speed drops.
1234
Shut engine OFF/ON.
Engine speed signal indicates
Fuel shutoff valve will open
If code clears, resume
engine speed greater than 2,730
when engine speed falls below
mission.
RPM
2,184 RPM.
If code remains,
notify maintenance.
Stop Vehicle
Stop Vehicle Immediately
ECM turns off FSO supply
voltage.
1254
Shut engine OFF/ON.
Less than 6V detected at fuel
Engine will shut down.
If code clears, resume
shutoff driver
mission.
Excessive current draw.
If code remains,
Power supply faulty.
notify maintenance.
Stop Vehicle
Warning - Degraded
No performance limitations.
Operation
1255
Press RESET.
Fuel shutoff valve stays open.
Finish mission.
Externally
supplied
voltage
Notify maintenance.
detected going to fuel shutoff sup-
ply circuit
0005 00-39