TM 10-3930-675-24-1
ERROR CODES - CONTINUED
0005 00
Table 1. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Finish Mission
Information/Maintenance
Injector for cylinder #4 turned
1332
Notify maintenance.
off.
No current detected at injector for
cylinder #4 when voltage is turned
ON
Stop Vehicle
Warning - Degraded
No noticeable performance
Operation
effects possible.
1341
Shut engine OFF/ON.
Possibility of engine stopping
If code clears, resume
Severe loss of data from ECM
or difficulty in starting engine.
mission.
If code remains,
notify maintenance.
Stop Vehicle
Warning - Degraded
No noticeable performance
Operation
1343
Shut engine OFF/ON.
effects possible.
If code clears, resume
May encounter severe loss of
Microprocessor communication
mission.
power.
error inside ECM
If code remains,
notify maintenance.
Finish Mission
Information/Maintenance
Possibly too short of time for
ECM to power down, less than
1346
Notify maintenance.
Software error in ECM
30 seconds.
Stop Vehicle
Warning - Degraded
Engine is degraded to no air
Operation
setting.
1352
Press RESET.
Finish mission.
Low voltage detected at sensor
Notify maintenance.
Faulty power supply.
Stop Vehicle
Stop Vehicle Immediately
Reduced power and speed.
1415
Check oil level.
Oil pressure signal indicates
Press RESET.
below critical threshold
If error remains,
notify maintenance.
Finish mission.
Finish Mission
Information/Maintenance
Engine is degraded to no air
1419
Notify maintenance.
setting.
Error in intake manifold pres-
sure sensor signal detected by
ECM
0005 00-42
