TM 10-3930-675-24-1
TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED
0007 00
Table 9. Bogie Wheel System Troubleshooting Procedures (Non-Error Code) - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Bogie Wheels Will Not Lift or Lower -
d. Replace damaged or leaking
Continued.
bogie wheel cylinder(s) (WP
0233 00).
e. Replace the over-center valve
(WP 0182 00).
Table 10. Forklift Kit Troubleshooting Procedures
(Non-Error Code).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Fork Functions Not Working Properly.
1. Check
for
any
active Perform troubleshooting for
tophandler error code(s).
00).
2. Check operation of
all a. If no tophandler functions
tophandler functions.
operate, check tophandler
pump pressure at test point 11
(WP 0188 00).
b. Troubleshoot pump control
circuit (611 solenoid) (WP
50).
c. Replace
steering
and
tophandler pump assembly
(WP 0242 00).
3. Check operation of the forklift Ensure both proximity switches
kit proximity switches and cam are active and cam mechanism
mechanism.
operates properly.
4. Inspect lines, hoses, and a. Replace any damaged line,
cylinders for damage or leaks.
hoses, or fittings, and tighten
Check the tophandler hose
loose connections (WP 0183
quick-disconnect fittings for
00).
connection.
b. Connect any disconnected
quick-disconnect fittings (WP
0183 00).
c. Replace damaged or leaking
cylinder (WP 0261 00).
5. Inspect fork wear plates and a. Remove any obstructions.
shaft sliding surfaces for b. Replace any worn or damaged
damage, wear, or obstructions.
wear plates.
6. Inspect forklift hydraulic Replace any damaged or leaking
valves for damage or leaking. hydraulic valves (WP 0184 00).
0007 00-89