TM 10-3930-675-24-1
ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED
0008 00
Table 2. Error Code 1311 - Injector Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1312 - Injector Circuit Failure -
b. Measure resistance from a. If resistance is not as specified,
Continued.
actuator harness connector
repair or replace connectors
pin 3 to all other pins in
(WP 0113 00).
sensor harness connector. b. If internal actuator harness
Resistance should be greater
requires replacement, notify
than 100k Ohms.
SRA.
c. Measure resistance from a. If resistance is not as specified,
actuator harness connector
repair or replace connectors
(WP 0113 00).
pin 4 to all other pins in
actuator harness connector. b. If internal actuator harness
requires replacement, notify
Resistance should be greater
SRA.
than 100k Ohms.
d. Measure resistance from a. If resistance is not as specified,
actuator harness connector
repair or replace connectors
(WP 0113 00).
pin 4 to all other pins in
sensor harness connector. b. If internal actuator harness
requires replacement, notify
Resistance should be greater
SRA.
than 100k Ohms.
>100K OHMS
3. Place ignition switch in OFF
position
and
disconnect
actuator harness from engine
ECU. Remove rocker arm
cover
(WP
0052
00).
Disconnect internal actuator
harness
from
15-pin
connector.
0008 00-6